Centsys D2 Turbo 240V


Centsys D2 Turbo 250kg 240V input (12V DC system) with steel pinion.


  • PCB C/W onboard 800mA SM Charger
  • Multichannel Nova Rx;
  • 2 x Nova four button Tx.
  • Excludes Battery and Rack

Availability: 1 in stock

SKU: A-D2TSPCLB02_AU Category:


The D2 Turbo is a high-speed, cost-effective operator for domestic gates weighing up to 250kg, with a maximum speed of 400 millimeters per second and powerful peak push force rated at 9kgf. This operator is exceptionally quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the D2 Turbo is the complete motor for a standard, domestic four-meter gate.
The D2 Turbo Low-Voltage operator is designed specifically for sites with no mains at the gate to reduce installation costs while delivering outstanding reliability, comprehensive functionality and selectable high-security or standard speeds. With the D2 Turbo Low-Voltage, there is no need for costly high-voltage cable runs and expensive isolators. Simply use a low-voltage step-down transformer or solar power supply. Now that’s fast! Sleek, strong, stylish – and even eco-conscious – this CENTSYS has it all.

Main Features

  • Turbo speed for greater security and convenience.
  • Very easy to install and set up, saving you time and money.
  • Reliable battery backup.
  • Dedicated Solar Mode – allows you to disable the Mains Fail buzzer when using solar power.
  • Onboard multichannel CENTSYS receiver.
  • Multiple Modes of Operation.
  • Adaptive Collision Sensing.
  • Modular components clip together for easy maintenance.
  • Lockable, easy Manual Override.
  • Now with robust steel pinion – can be easily retro-fitted and ensures reliable operation

Technical Specifications

Technical DataD2 TurboD2 Turbo Low-voltage
Input voltage 190V– 240V AC ±10%, 50Hz10V – 20V AC ±10%, 50Hz; 10V – 28V DC
Motor voltage12V DC12V DC 3
Motor power supply 4Battery-driven (standard capacity – 12V 5Ah)Battery-driven (standard capacity – 12V 5Ah)
Current consumption (mains)Intergral with controller 1A @ 13.7V +/- 1%Intergral with controller 1A @ 13.7V +/- 1% (Input voltage > 15V AC)
Current consumption (motor at rated load)8/12A8/12A
Current consumption (quiescent load)95mA95mA
Operator push force
Gate mass – maximum250kg250kg
Gate length – maximum20m20m
Gate speed – m/min 622 – 26m/min22 – 26m/min
Gate speed – mm/sec367 – 433mm/sec367 – 433mm/sec
Drive Pinion17T Module 417T Module 4
Maximum daily cycle10 cycles/day10 cycles/day
Design life30 000 cycles30 000 cycles
Operations in standby with standard battery 4, 5
Half day60 cycles60 cycles
Full day40 cycles40 cycles
Collision sensingElectronicElectronic
Operating temperature-15°C to +50°C-15°C to +50°C
Degree of protectionIP54IP54
Controller incorporatedD2 Controller_HD2 Controller_L
Onboard receiver typeNOVA code-hopping onboard, multichannelNOVA code-hopping onboard, multichannel
Receiver frequency433.92MHz433.92MHz
Receiver code storage capacity32 transmitter buttons32 transmitter buttons
Mass of unit packed5kg5kg
Packaging dimensionsLength: 255mm x Width: 188mm x Height: 333mmLength: 255mm x Width: 188mm x Height: 333mm
[*] – Can operate off a solar supply, consult CENTSYS for assistance. [**] – A larger 7Ah battery can be used for longer standby times. [***] – Can be configured.
Weight5.1 kg
Dimensions33 × 25 × 18 cm


There are no reviews yet.

Be the first to review “Centsys D2 Turbo 240V”

Your email address will not be published. Required fields are marked *

Shopping Cart